Skip to content
Transformer exterior paints

Transformer Exterior Paints

Protective paint for transformer tanks, covers and radiators against weather and corrosion.

Technical information

Product typeIndustrial exterior paint for transformer tanks and bodies
Application areaTank, cover, radiators and metal body
ProtectionCorrosion, moisture, sunlight and outdoor conditions
SystemPrimer + topcoat; build depends on environment and job
ColourProduced in the required shade
ApplicationSpray gun or brush
Surface preparationOil-free, rust-free and dry surface
Thinning and drying timesIn the product TDS
SupplyStandard products from stock

Drying time, viscosity and pack sizes are given in the product TDS.

Transformer exterior paint is an industrial protective paint applied to the tank, cover, radiators and metal body of transformers to protect them against corrosion, moisture, sunlight and outdoor conditions. Orhun Kimya manufactures these paints at its plant in Beylikdüzü, Istanbul, and can adapt the colour shade and application properties to the manufacturer's line and the environment the transformer will work in.

Transformers often run outdoors for years, exposed to rain, sun, dust and temperature changes. Rust that starts on the tank spreads from weld seams, corners and edges, and over time harms both the appearance and the life of the tank. A well-chosen, correctly applied exterior paint slows this process and extends the maintenance interval.

Where is it used?

  • Tanks, covers and frames of oil-filled distribution and power transformers,
  • Radiators and corrugated tank walls,
  • Metal enclosures of transformer and switchgear equipment,
  • Transformers repainted during maintenance or overhaul,
  • Equipment working in harsh outdoor conditions such as coastal, industrial and dusty areas.

Properties

  • Corrosion protection: separates the metal surface from moisture and oxygen and slows rust formation.
  • Outdoor durability: developed to protect against rain, humidity, sunlight and temperature changes.
  • Product-specific solution: the paint can be adapted to the manufacturer's application method, drying conditions and required performance.
  • Colour shade: produced in the required shade; batch-to-batch colour consistency is monitored by quality control.
  • Stock availability: standard products are supplied from stock.

How is it applied?

  1. Prepare the surface: remove oil, dirt and transformer oil spills with a suitable solvent; remove rust, mill scale and loose old paint by blasting or mechanical means.
  2. Make sure the surface is dry and paint it before it rusts again.
  3. Apply the anti-corrosive primer. A brushed stripe coat on weld seams, corners and sharp edges first secures the film thickness in these areas.
  4. Once the primer has dried, apply the topcoat by spray gun or brush in thin, even coats.
  5. If thinning is needed, choose the thinner and ratio according to the TDS; for thinner types see thinner types.
  6. Recoat interval and full drying time are given in the product TDS; do not stack or ship the transformer before it is fully dry.

How to choose, what to watch

The operating environment decides the choice. Indoors and in mild conditions a simpler system may be enough; in coastal, industrial and high-sunlight areas a multi-coat system of anti-corrosive primer and weather-resistant topcoat is preferred. In general, epoxy paints stand out in primers and intermediate coats for adhesion and chemical resistance, and polyurethane paints in topcoats for UV and weather resistance. For a fast-drying one-component option, our topcoat paints can also be considered.

Before ordering, tell us the colour shade, environment, application method, drying conditions and the number of coats you want; we will send the suitable system and its TDS. For transformer terminals and connection points see terminal and insulating paints, and for winding impregnation see transformer varnish.

Common mistakes

  • Skipping surface preparation: paint on an oily or rusty surface soon peels off.
  • Neglecting edges and weld seams: paint thins out on sharp edges, and rust usually starts there.
  • Applying one thick coat: causes runs, sagging and poor through-drying.
  • Ignoring the recoat interval: intercoat adhesion weakens.
  • Adding thinner by eye: film properties and drying suffer.

For the technical data sheet (TDS) and colour options of our transformer exterior paints, write to us via the form or WhatsApp.

Questions

What does transformer exterior paint do?

It protects the transformer tank, cover and radiators against corrosion, moisture, sunlight and outdoor conditions. It slows rust formation and extends the maintenance interval.

How many coats does a transformer tank need?

Usually an anti-corrosive primer and a topcoat; an intermediate coat may be added for harsh environments. The number of coats and film thickness depend on the environment and are given in the product TDS.

In which colours is transformer paint produced?

It is produced in the required shade. Just state the shade in your order; batch-to-batch colour consistency is monitored by quality control.

How is the transformer surface prepared before painting?

Oil and transformer oil spills are cleaned with solvent; rust, mill scale and loose old paint are removed by blasting or mechanical means. The surface must be dry and painted before it rusts again.

Can an old transformer be repainted?

Yes. Loose paint and rust are removed, sound old paint is cleaned and abraded, then primer and topcoat are applied. Consult us beforehand about compatibility with the old paint.

What is transformer paint thinned with?

Thinner type and ratio are given in the product TDS; ask for it via the form or WhatsApp. Do not add thinner by eye.

Are terminals painted with this paint too?

No. Terminals and connection points need terminal and insulating paints with high electrical strength; exterior paint is for the tank and body.

Transformer winding and core, close-upAn Orhun Kimya insulating varnish can held in an open handEmpty tins seen from above in a box, with an Orhun Kimya can on top

More in this group

Let's choose your varnish

Tell us the motor type, the operating temperature and how you apply varnish; we will send the right product, its TDS and a price.

+90 532 358 15 64
ali@orhunkimya.com.tr

Nothing you type is stored on our server; your message opens directly in WhatsApp or your email app.