Insulating varnish since 1988
Winding and transformer varnishes, insulating paints and resins for motor and transformer windings. Made in Istanbul, shipped to more than 22 countries.
Get a quote on WhatsApp
To a rewind shop in Anatolia 
and a factory selling motors to Europe we ship the right varnish 
with the same care.
Our products
Electric motor insulation
9 products
Air-drying winding varnish
OR 1xx series. No oven, dries at room temperature.
Baking winding varnish
OR 3xx series. Highest bond strength.
OR-114 class H varnish
2K polyurethane, class H (180 °C), refrigerant-gas resistant, no oven.
OKA-501 motor insulating lacquer
Class F, very fast drying; for rewind shops. T-501, 4 L.Armature varnish
For high-speed armature and rotor windings.
Insulating topcoat lacquers
Anti-flash topcoat: OR-990 (F) and epoxy OR-411 (H); red, black, grey.
Motor insulating spray
Class F, coats windings and terminals in one step.
Casting resins
For potting, moulding and insulating casts.
Polyester resin
Button, SMC/BMC, casting, GRP, RTM and acrylic grades.
Transformer insulation
7 productsAir-drying transformer varnish
Class F (155 °C), dip, pour or spray.
Baking transformer varnish
Class F and H; polyester, epoxy or PU.LV and MV transformer varnishes
For low and medium voltage transformers.
Variac varnish
120–200 °C, colourless, no sediment.Variac paste
Filling paste for variac surfaces.
Pole and insulation paints
For poles and connections.Transformer exterior paints
Outdoor protection for the tank.
Electronic circuit products
3 products
Industrial paints and thinners
5 products
Flooring
5 products
Hobby resins
4 products
How hot does your motor run?
Class F up to 155 °C
Industrial motors and pumps; the most common class.
For this class:
The varnish class must be at least the class of the winding. Thermal classes follow IEC 60085. The class of each product is stated in its TDS.
How to apply varnish
-
Prepare first
The winding must be clean, oil-free and dry. Preheat old motors to drive out moisture.
-
Then dip
Keep the winding in the varnish until bubbling stops, then let the excess drain.
-
Cure last
Allow the full drying time for air-drying grades; follow the time and temperature plan for baking grades.
Our dealers across Türkiye
Our products are also sold through these dealers.
- İstanbulAlper Elektrik (Emrah Çelik)0545 889 55 05
- İstanbulElektro Ak Bobinaj ve Elk. Malz. San. ve Tic. Ltd. Şti.0212 321 13 00
- İzmirTemka İç ve Dış Ticaret Ltd. Şti.0232 458 91 79
- KonyaÖlçer Elektrik Elektronik San. ve Tic. Ltd. Şti.0533 232 15 56
- KonyaSelçuklu Ticaret (Mehmet Haydar Büyükketenci)0332 345 08 83
- KayseriRuhbaşlar Elektrik Otomasyon0352 336 32 10
- GaziantepHak Elektrik Bobinaj0342 231 69 74
- DiyarbakırKale Hidrofor Pompa0539 700 37 44
- All dealers and contact details
In Beylikdüzü since 1988
Our own formulas
We have more than 100 formulas of our own, and we develop custom varnishes for stripping type, viscosity and drying time.
We speak the rewinder's language
More than a thousand rewinders use our products. We work with dealers in Türkiye and export to more than 22 countries.
Questions
What is winding varnish?
A solvent-borne or solventless insulating varnish applied to motor and transformer windings after winding. It penetrates between the wires, bonds them together and protects the winding from moisture, dust and heat.
Should I choose air-drying or baking varnish?
Choose air-drying OR 1xx if you have no oven or do repair and field work; choose baking OR 3xx for series production and the highest endurance. Air-drying or baking winding varnish?
Which thinner and what ratio?
Generally 3 parts varnish to 1 part thinner. Air-drying grades use T-100, OKA-501 uses T-501 and baking grades use T-300. Which thinner for winding varnish, and at what ratio?
Can I get the TDS and a price list?
Yes. Send us your requirement on WhatsApp or by email and we will send the technical data sheet (TDS), the safety data sheet (SDS) and a current price.
Do you send samples?
Yes. We send samples so you can test the product on your own line. Just tell us the motor type and how you apply varnish.
Do you make custom products?
Yes. We adapt colour, viscosity, drying time, film thickness and packaging to your needs.
Do you export?
Yes. We export to more than 22 countries. For a quote, tell us your country, the product and the quantity.